Drill Pipe

Product Type: API Drill Pipe/ Low Temperature DP/ Sour Service DP/ API Tool Joints
Standard: API 5DP, API Spec 7, API RP7G
Specification:
Steel Grade: E75, X95, G105, S135
OD: 2-7/8" ~6-5/8"
Connection: API and Premium
Internal Coating: DPC, TK34, TC2000 etc.

Drill pipes come in varying specifications of sizes, strength and weight. The length of a drill pipe is typically Range 2 at 31 feet but can come in other lengths as well.

A drill pipe is thick-walled and designed to hold its own weight in a drill string as the drill pipes are often run thousands of feet under the surface. The centre is hollow to allow drilling mud to be pumped down through it and cirulated out through the annulus during oil drilling.

They are joined together with the Bottom-Hole-Assembly (BHA) and drill bit to make up the drill stem and this is what drills the wellbore.

API 5DP Specification:

Designations*					Tool Joint Data
Pipebody OD (Inches)	Poundage (Pounds Per Foot)	Grade	Upset Type	Rotary Shouldered Connection	OD (Inches)	PIN ID (Inches)	Pin OD Length* (Inches)	Box OD Length* (Inches)
2-3/8	6.65	E	EU	NC26	3-3/8	1-3/4	7	8
2-3/8	6.65	X,G	EU	NC26	3-3/8	1-3/4	7	8
2-3/8	10.40	E	EU	NC31	4-1/8	2-1/8	7	9
2-3/8	10.40	X,G	EU	NC31	4-1/8	2	7	9
2-3/8	10.40	S	EU	NC31	4-3/8	1-5/8	7	9
3-1/2	9.50	E	EU	NC38	4-3/4	2-11/16	8	10-1/2
3-1/2	13.30	E	EU	NC38	4-3/4	2-11/16	8	10-1/2
3-1/2	13.30	X	EU	NC38	5	2-9/16	8	10-1/2
3-1/2	13.30	G	EU	NC38	5	2-7/16	8	10-1/2
3-1/2	13.30	S	EU	NC38	5	2-1/8	8	10-1/2
3-1/2	15.50	E	EU	NC38	4-3/4	2-9/16	8	10-1/2
3-1/2	15.50	X	EU	NC38	5	2-7/16	8	10-1/2
3-1/2	15.50	G	EU	NC38	5	2-1/8	8	10-1/2
3-1/2	15.50	S	EU	NC40	5-1/2	2-1/4	7	10
4	14.00	E	IU	NC40	5-1/4	2-13/16	7	10
4	14.00	X	IU	NC40	5-1/4	2-13/16	7	10
4	14.00	G	IU	NC40	5-1/4	2-13/16	7	10
4	14.00	S	IU	NC40	5-1/4	2-9/16	7	10
4	14.00	E	EU	NC46	6	3-1/4	7	10
4	14.00	X,G	EU	NC46	6	3-1/4	7	10
4	14.00	S	EU	NC46	6	3	7	10
4-1/2	16.60	E	EU	NC50	6-5/8	3-3/4	7	10
4-1/2	16.60	X	EU	NC50	6-3/8	3-3/4	7	10
4-1/2	16.60	G	EU	NC50	6-5/8	3-3/4	7	10
4-1/2	16.60	S	EU	NC50	6-3/8	3-1/2	7	10
4-1/2	20.00	E	EU	NC50	6-3/8	3-3/4	7	10
4-1/2	20.00	X	EU	NC50	6-5/8	3-1/2	7	10
4-1/2	20.00	G	EU	NC50	6-3/8	3-1/2	7	10
4-1/2	20.00	S	EU	NC50	6-5/8	3-1/4	7	10
4-1/2	16.60	E	IEU	NC46	6-1/4	3-1/4	7	10
4-1/2	16.60	X	IEU	NC46	6-1/4	3-1/4	7	10
4-1/2	16.60	G	IEU	NC46	6-1/4	3	7	10
4-1/2	16.60	S	IEU	NC46	6-1/4	2-3/4	7	10
4-1/2	20.00	E	IEU	NC46	6-1/4	3-1/4	7	10
4-1/2	20.00	X	IEU	NC46	6-1/4	3	7	10
4-1/2	20.00	G	IEU	NC46	6-1/4	2-3/4	7	10
4-1/2	20.00	S	IEU	NC46	6-3/8	2-1/2	7	10
5	19.50	E	IEU	NC50	6-5/8	3-3/4	7	10
5	19.50	X	IEU	NC50	6-5/8	3-1/2	7	10
5	19.50	G	IEU	NC50	6-5/8	3-1/4	7	10
5	19.50	S	IEU	NC50	6-5/8	2-3/4	7	10
5	19.50	E	IEU	5-1/2FH	7	3-3/4	8	10
5	19.50	X,G	IEU	5-1/2 FH	7	3-3/4	8	10
5	19.50	S	IEU	5-1/2 FH	7-1/4	3-1/2	8	10
5	25.60	E	NC50	6-5/8	3-1/2	3-3/4	7	10
5	25.60	X	IEU	NC50	6-5/8	3	7	10
5	25.60	G	IEU	NC50	6-5/8	2-3/4	7	10
5	25.60	E	IEU	5-1/2 FH	7	3-1/2	8	10
5	25.60	X	IEU	5-1/2 FH	7	3-1/2	8	10
5	25.60	G	IEU	5-1/2 FH	7-1/4	3-1/2	8	10
5	25.60	S	IEU	5-1/2 FH	7-1/4	3-1/4	8	10
5-1/2	21.90	E	IEU	5-1/2 FH	7	4	8	10
5	21.90	X	IEU	5-1/2 FH	7	3-3/4	8	10
5-1/2	21.90	G	IEU	5-1/2 FH	7-1/4	3-1/2	8	10
5	21.90	S	IEU	5-1/2 FH	7-1/2	3	8	10
5-1/2	24.70	E	IEU	5-1/2 FH	7	4	8	10
5	24.70	X,G	IEU	5-1/2 FH	7-1/4	3-1/2	8	10
5-1/2	24.70	S	IEU	5-1/2 FH	7-1/2	3	8	10
6-5/8	25.20	E	IEU	6-5/8 FH	8	5	8	11
6-5/8	25.20	X	IEU	6-5/8 FH	8	5	8	11
6-5/8	25.20	G	IEU	6-5/8 FH	8-1/4	4-3/4	8	11
6-5/8	25.20	S	IEU	6-5/8 FH	8-1/2	4-1/4	8	11
6-5/8	27.70	E	IEU	6-5/8 FH	8	5	8	11
6-5/8	27.70	X,G	IEU	6-5/8 FH	8-1/4	4-3/4	8	11
6-5/8	27.70	S	IEU	6-5/8 FH	8-1/2	4-1/4	8	11
*Note: · Designations are shown for identification purposes when ordering. · These are standard tool joint lengths. We also offer 2-inch or 4-inch longer than standard tool joint lengths to cater to your requirements.
Protection			Mill’s standard varnish coating on external surface. Pressed Steel or Heavy Duty Plastic thread protectors at manufacturers’ option.
Options			Liquid or Powder Internal Plastic Coating. Hardbanding Make & Break Testing NS-1 Specifications DS-1 Standard Service DS-1 Critical Service
Packing Options			Bundled with standard metal strapping Bundled with wire rope slings Packed in wooden cradles
Mill Test Certificates			Issued in accordance with API 5DP and API RP7G specifications. Third Party Inspection can be performed on request at buyer’s care and expense.